Overhead Storage Loft

Lack of space in the garage? This ceiling-mounted loft adds extra storage capacity in an often overlooked place - overhead!

Looking for more storage space in your garage? Look up. Even though the walls and floor may be jampacked, there’s often room up above that can be used as a storage area for sporting goods, seasonal items, and other garage clutter. One way to take advantage of that space is to build this ceiling-mounted storage loft. As you can see in the photo above, the loft is a suspended platform that’s used to hold bulky or lightweight items that don’t fit elsewhere. Seasonal and other specialty items are stored in plastic containers with lids to seal out dust. The loft is designed so that each storage bay holds two 17-gallon Rubbermaid containers sitting side by side. This is a big plus in my garage, as I store all of my holiday decorations and extra gardening supplies in these bins. And it’s out of the reach of children, so it keeps anything potentially hazardous out of their hands. Another option is to use smaller containers. I set three 19-quart containers side-by-side in one bay and then stacked 12-quart containers on top of them. Of course, you can also store any item that is relatively light on the shelves. And since the loft compartments are open at the ends, items can spill over from one unit to the next without hitting a divider. Whatever combination of containers you choose, you’ll want to get them in the planning phase before you build the loft. That way, you’ll have just the right amount of room for all your necessities and can decide how much extra space you’ll actually need — and not end up with extra items still piled up on the floor.

SELECT YOUR PLAN PACKAGE

Unit

What You Get:

  • 5 printable (digital) pages of step-by-step instructions
  • Full-color photos, illustrations and exploded view

Product Recommendations

We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)

1/8" Roundover Bit

Tape Measure

Titebond Molding Glue

Table Saw Blade